Insertion Point [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
After clicking on 'Bridge Geometry> Insertion Point' in the navigation treeview, follow the steps to define the Insertion Point. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click three-dots icon on Location cell and set a support line as Abut1. |
 |
| 2 | Keep the Longitudinal Offset as default. |
 |
| 3 | ||
| 4 | Enter the Transverse Offset as 16.5. |
|
| 5 | ||
| 6 | Keep the insertion point name as default. | |
| 7 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |
|
| 8 | To model all the insertion points, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |
Insertion Point |
|---|
Bridge Parameters IP1 Abut1 0.0000 16.5000 0
IP2 Abut1 0.0000 5.5000 0
IP3 Abut1 0.0000 -5.5000 0
IP4 Abut1 0.0000 -16.5000 0
IP5 Pier2 0.0000 16.5000 160
IP6 Pier2 0.0000 5.5000 160
IP7 Pier2 0.0000 -5.5000 160
IP8 Pier2 0.0000 -16.5000 160
IP9 Pier3 0.0000 16.5000 370
IP10 Pier3 0.0000 5.5000 370
IP11 Pier3 0.0000 -5.5000 370
IP12 Pier3 0.0000 -16.5000 370
IP13 Abut4 0.0000 16.5000 530
IP14 Abut4 0.0000 5.5000 530
IP15 Abut4 0.0000 -5.5000 530
IP16 Abut4 0.0000 -16.5000 530 |
The completed insertion points are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.