Support Lines [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
After clicking on 'Bridge Geometry> Support Lines' in the navigation treeview, follow the steps to define the Support Line. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click three-dots icon on Bridge cell and set a bridge alignment as BRG1. |
|
| 2 | Keep the Station, Skew Angle and Transverse Offset as default. |
|
| 3 | ||
| 4 | ||
| 5 | Set name as Abut1. |
|
| 6 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. | |
| 7 | To model all the support lines, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |
Support Lines |
|---|
Bridge Parameters Abut1 BRG1 0.0000 0.0000 0.0000
Pier2 BRG1 160.0000 0.0000 0.0000
Pier3 BRG1 370.0000 0.0000 0.0000
Abut4 BRG1 530.0000 0.0000 0.0000 |
The completed support lines are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.