Bridge Alignment [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
After clicking on 'Bridge Geometry> Bridge Alignment' in the navigation treeview, follow the steps to define the Bridge Alignment You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click the three-dots icon on the Alignment cell, and then set ALIGNMENT1. |  |
| 2 | Keep the bridge alignment name as default. |  |
| 3 | You can enter additional bridge info through the Bridge Info tab if needed.
|
The completed bridge alignment is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.
To view the entire procedure explained on this page, please watch the recorded Video below.