Mats

Mat foundation is defined and drawn from this section.

Open

Figure 1

→ Click the “Mat Edge” button (Figure 1) to draw the mat foundation (Figure 2).

Open

→ Enter the properties of the mat edge, such as offset, thickness, soil capacity, or soil subgrade modulus.

→ Select the concrete and rebar material.

To divide mat edge into pieces with different properties;

→ Click the “Mat Piece” button (Figure 1) and draw the piece area (Figure 4).

→ Enter the properties of the mat piece, such as offset, thickness, soil capacity, or soil subgrade modulus.

→ Select the concrete and rebar material.