/
Loads

Loads

Owned by Gokhan Alkan (Unlicensed)
Last updated: May 27, 2023 by Seda Ozdemir (Unlicensed)
2 min read

In this section, you can assign load properties such as class, type, and magnitude. Load assignment can be done either by importing from the AEC|BOLT BIM Cloud database or by providing user input.

Figure 1

To view the available loads in the database, click on the "Load DB" button (refer to Figure 1), as shown in Figures 2-3-4-5. After selecting the relevant loads, click the "Import" button to import them.

Please note that the load values in the library database are determined based on the occupancy category of the loading area.

Figure 2

Figure 3

Figure 4

Figure 5

To create a custom load as a user;

→ Click the “Add” button (Figure 1) and select the class and type of the load and enter the magnitude in the spreadsheet (Figure 6).

Figure 6

 

 

 

Related content