Girder/Cross Frame Erection (Complete)
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
After clicking on ‘Construction> Superstructure Construction> Girder/Cross Frame Erection' in the navigation treeview, follow the steps to define the Girder/Cross Frame Erection. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click three-dots icon on Stage cell and select a Construction Stage as GirderStage. |
  |
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bridge is define in the next step. | |
| 3 | ||
| 4 | Click the three-dots icon on the Bridge cell, and then set BRG1. |
|
| 5 | Keep the Splice Load and Stiffener/Gusset Plate Load and Girder Self Weight Factor as default. |
|
| 6 | Proceed to the next step to verify the model. | |
The completed girder/cross frame erection is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.