Superstructure Attachment Construction [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
- mert.goktas (Unlicensed)
After clicking on ‘Construction> Superstructure Construction> Superstructure Attachment Construction' in the navigation treeview, follow the steps to define the Superstructure Attachment Construction. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click three-dots icon on Stage cell and select a Construction Stage as FBarrierStage. |   |
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the superstructure attachments are define in the next step. | |
| 3 | ||
| 4 | Click three-dots on the cell of the Stage and pick the barriers BR1,BR2. | |
| 5 | Keep the Self Weight Factor as default. | |
| 6 | Click the three-dots icon on the Stiffness cell, and then select NO. | |
| 7 | Proceed to the next step to verify the model. | |
The completed superstructure attachment construction is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.