Bearing Construction [EX1-SIG]
- Orkun Gülel (Unlicensed)
- Melis Ceylan
- Umut Nuhat Sevinc
After clicking on ‘Construction> Substructure Construction> Bearing Construction' in the navigation treeview, follow the steps to define the Bearing Construction. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click three-dots icon on Stage cell and select a Construction Stage as GirderStage. |   |
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the insertion points are define in the next step. | |
| 3 | ||
| 4 | Click three-dots on the cell of the Insertion Points and pick all the insertion points. | |
| 5 | Proceed to the next step to verify the model. | |
The completed bearing construction is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.