Prestressed I Girder Bridge Design Reports [QG-7]
- Cagin Yakar
- Seda Ozdemir (Unlicensed)
Access Precast I-Girder Training Example
Please follow the instructions below to access ‘Precast I-Girder Training Example’
1 | → Log in to your account and locate the 'Project' option in the top right corner.
|  |
| → Click on 'Project' and then select 'NEW' from the top left corner of the screen. |  |
2 |
→ Under the 'Example Project' section, click on 'New Project' specifically located within the 'Precast I-Girder Training Example'. |
|
3 |
→ Provide a name for your project and proceed to open the example project.
|
|
| Please note that the initial download process for the library components take approximately 2 minutes and 30 seconds to complete. The reopening of the same project will experience a notable increase in speed, primarily due to the caching of OpenBrIM library objects within your browser. The loading of library objects during this process generally takes less than 2-3 seconds. | |
|
| |
View Design Reports of Precast I-Girder Training Example
Please follow the instructions provided below to initiate precast I-girder code check reports.
In this section, we will examine the code check reports supported by the Steel I Girder Workflow.
Prestressed I-Girder Code Check
Pier Cap Code Check
Pier Column Code Check
Pier Footing Code Check
Pile Capacity Code Check
| 1 |
Please ensure that the 'FEM' button located in the top-middle of the screen is active. If the button is inactive, the 'Analysis' button will not appear.
|
|
| 2 | ||
| 3 | Once the 'Analysis' button appears in the top left corner, it indicates that the FE model has been compiled and is ready for analysis.
|
|
| 4 | → Click on it to initiate the finite element analysis (FEA) of the precast I-girder bridge. |
|
| 5 |
| |
| 6 | → Once the analysis is completed, click the "Close" button to exit the analysis interface. |
|
| 7 | → Proceed by clicking the "Design" button to calculate the parametric design parameters and collect the analysis results required for the design reports. |
|
| 8 | ||
| 9 | → After the design run is completed, click on the "OK" button to start viewing the created design reports. |
|
| 10 | → Clicking on the "Report" and "Detailed Report" buttons successively will display a range of design reports that can be accessed. |
|
| 11 | → By clicking on the "Detailed Report" option, you will be able to access a diverse range of design outputs. |
|