Shear Stud [EX1-STG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to define shear stud.
| 1 | Navigate Connections > Shear Stud |  |
| 2 | Select the Girders on which the Shear Studs will be created. | |
| 3 | Enter Enter the name. Enter Start & End Stations on where the shear studs will be placed. |  |
| 4 | You can make adjustments to the "Shear Stud" tab if you wish. |
|
| 5 | To enable or disable the display of Shear Stud, edit the "Show Bolts (Detailing)" parameter. | |
| 6 | Start and End Station parameters of the Shear Stud should take into account skew angle. For example, if the Insertion Point has a skew angle as 30°, Shear Stud Start and End Stations should be updated by multiplying with the sinus of the skew angle. | |
| 1 | Go to Shear Stud under Connections on the tree view. |
| 2 | Copy Position, and Shear Stud from model inputs and paste into OpenBrIM. |
The Shear Stud that have been created are illustrated below.
Shear Stud | |
|---|---|
Position | Shear Stud |
SS1 G1 1.975 519
SS2 G2 1.975 519 | SS1 0.875 5 0.375 3 6 8 YES
SS2 0.875 5 0.375 3 6 8 YES |