Pier Column Code Check [EX1-STG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to create Pier Column code check.
| 1 | In this section, please specify which column or columns the code check will be applied to. | |
| 2 | Navigate to Substructure Code Checks > Pier Column Code Check | 
|
| 3 | Click three-dots icon on Pier and select as Column1 (As a different way, the relevant column can be selected on the 3D view by clicking "Pick".) | |
| 4 | Click three-dots icon on Template.
Select the PCCT1 "Pier Column Code Check" template defined in the previous steps for all. | 
|
| 5 | Click three-dots icon on Section Data and click Edit. Section Data (parameters) appear in the combobox. | |
| 6 | Click three-dots icon on Section and click Select.
Select the "ColSec_P2" you want to code check for Pier Column (Column1). |
|
| 7 | Click three-dots icon on Stirrup Rebar Profile Set Stirrup Rebar Profile as ASTMA615No6. | |
| 8 | Navigate back to Inputs tab. Set Tranverse Reinforcement Type as Tie. | |
| 1 | Navigate to Pier Column Code Check under Superstructure Code Checks on the tree view. |
| 2 | Copy Inputs and Section Data (spreadsheet) from model inputs and paste into OpenBrIM. |
The Pier Column Code Check have been created.
Pier Column Code Check | |
|---|---|
Inputs | Section Data |
PCC3 PCCT1 Column1 [[ColSec_P2, 0, ASTMA615No6, 6, 2, 2]] 0.003 0.75 0.005 0.9 Tie | ColSec_P2 0 ASTMA615No6 6 2 2 |