Cross Frame Code Check (AASHTO) [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
- mert.goktas (Unlicensed)
After clicking on ‘Superstructure Code Checks> Cross Frame Code Check (AASHTO)' in the navigation treeview, follow the steps to define the Cross Frame Code Check. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click three-dots icon on Cross Frame cell and select a Cross Frame as CFKT28. |   |
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the code check template is define in the next step. | |
| 3 | ||
| 4 | Click the three-dots icon on the Code Check Template cell, and then set CFrameCCT. |
|
| 5 | Set name as CFKType. |
|
| 6 | Keep Shear Lag Factor parameters as default. |
|
| 7 | To model all the cross frame code check, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |
Cross Frame Code Check (AASHTO) |
|---|
General CFKType CFKT28 CFrameCCT
CFXType CFX3 CFrameCCT |
The completed cross frame code checks are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.