WL AASHTO [EX1-SIG]
- Umut Nuhat Sevinc
- Melis Ceylan
After clicking on ‘Loading> Loads> Wind Load> Wind Load on Live Load> WL AASHTO' in the navigation treeview, follow the steps to define the Wind Load on Live Load. You can use the collapsed documentation page below for more information on the explanations of each paramete.
| 1 | Click three-dots icon on Stage cell and select a Construction Stage as WLStage. |   |
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the center lines of lanes are define in the next step. | |
| 3 | ||
| 4 | Click three-dots icon on Center Lines of Lanes cell and Edit. | |
| 5 | Please set the following values sequentially: | |
| 6 | Keep the Transverse Force as default. | |
| 7 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the FEA view of OpenBrIM. You can refer to the Quick Tip below to learn how the loading displayed in the screenshot is viewed. | |
| 8 | ||
| 9 | Proceed to the next step to verify the model. | |
The completed wind load on live load is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.