Custom Barrier [EX1-PIG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to add Custom barriers to Left sides of the bridge.
| 1 | Navigate to Superstructure Attachments > F Shape Barrier |
|
| 2 | In the project, no barrier definition has been made for the left side of the deck. To define a custom barrier for the left side of the deck, click three-dots icon on Deck cell and set Span1. | |
| 3 | The "section" parameters we defined in the previous steps will be utilized for the barrier. In this step, the "Exist_Barrier_sw" section, along with its required details and parameters, will be used for the barrier definition. |
|
| 4 | Please assign the section value to "exist" for the Custom Barrier. | |
| 5 | Enter Start Transverse Location and End Transverse Location as -160.43 |
|
| 6 | Enter the name of the Custom Barrier as “CustBar1” | |
| 7 | To create F barriers for the 2nd and 3rd spans please follow the previous steps and repeat them accordingly. |
|
| 1 | Navigate to Custom under Superstructure Attachments on the tree view. |
| 2 | Copy Barrier from model inputs and paste into OpenBrIM. |
The Custom Barrier that have been created are illustrated below.
Custom Barrier |
|---|
Barrier |
CustBar1 Exist_Barrier_sw Span1 -160.43 -160.43
CustBar2 Exist_Barrier_sw Span2 -160.43 -160.43
CustBar3 Exist_Barrier_sw Span3 -160.43 -160.43 |