Barrier [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
After clicking on 'Superstructure Attachments> Barrier' in the navigation treeview, follow the steps to define the Barrier. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click the three-dots icon on the Section cell, and then use the option ‘Select..’.
|
  |
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the Deck is set in the next step. |
|
| 3 | ||
| 4 | Set deck to Deck1. |
|
| 5 | Keep Orientation, Start Station Option, End Station Option as default. |
|
| 6 | Click the three-dots icon on the Start Transverse Location set it to Left.
|
|
| 7 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |
|
| 8 | To model all the f shape barrier, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |
F Shape Barrier |
|---|
F Shape Barrier BR1 FShape Left Deck1 Deck Start N/A Deck End N/A Left Left
BR2 FShape Right Deck1 Deck Start N/A Deck End N/A Right Right |
The completed barrier are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.