Pile [EX1-PIG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to add piles.
| 1 | Navigate to Substructure > Pile | 
|
| 2 | Click three-dots icon on Substructure and select or pick EndBent1.
Enter the name as Pile1 | |
| 3 | Click three-dots icon on the Section Data and click edit.
Enter the section data as follows for Pile1.
|
|
| 4 | Enter Longitudinal Offset and Transverse Offset from the origin for Pile1. Hold the "default" values of the other parameters as such. | |
| 5 | Navigate to FEA tab. Click three-dots icon on Pile Properties and click Edit.
|
|
| 6 | Edit Tx/Ty/Tz/Rx/Ry/Rz properties. Enter the Pile1 property data into the Pile Property spreadsheet exactly as shown in the figure. | |
| 7 | Enter a pile capacity (kip) of 1000 for each pile. |
|
| 8 | Repeat the previous steps to create all Piles in this project. Assign parameters value as in the figure |
|
| 1 | Navigate to Pile under Substructure on the tree view. | |
| 2 | Copy Pile from model inputs and paste into OpenBrIM. | |
| 3 | Navigate to FEA under Pile on the tree view. | |
| 4 | Copy FEA data from model inputs and paste into OpenBrIM. | |
The Pile that have been created are illustrated below.
With this step, the bridge model is now complete.
Pile | |
|---|---|
Pile | FEA |
Pile1 EndBent1 [[612, Circle_exist_shaft_EB, Circle_exist_shaft_EB]] 0.0000 -11.5000 0.0000 0.0000 0.0000 0.0000 3.0000
Pile2 EndBent1 [[624, Circle_exist_shaft_EB, Circle_exist_shaft_EB]] 0.0000 -0.2403 0.0000 0.0000 0.0000 0.0000 3.0000
Pile3 EndBent1 [[624, Circle_exist_shaft_EB, Circle_exist_shaft_EB]] 0.0000 11.2420 0.0000 0.0000 0.0000 0.0000 3.0000
Pile4 EndBent2 [[528, Circle_exist_shaft_EB, Circle_exist_shaft_EB]] 0.0000 -13.6937 0.0000 0.0000 0.0000 0.0000 3.0000
Pile5 EndBent2 [[540, Circle_exist_shaft_EB, Circle_exist_shaft_EB]] 0.0000 -0.7345 0.0000 0.0000 0.0000 0.0000 3.0000
Pile6 EndBent2 [[552, Circle_exist_shaft_EB, Circle_exist_shaft_EB]] 0.0000 12.2247 0.0000 0.0000 0.0000 0.0000 3.0000
Pile7 Pier_1 [[468, Circle_exist_shaft_Pier, Circle_exist_shaft_Pier]] 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 3.0000
Pile8 Pier_2 [[432, Circle_exist_shaft_Pier, Circle_exist_shaft_Pier]] 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 3.0000
Pile9 Pier_3 [[504, Circle_exist_shaft_Pier, Circle_exist_shaft_Pier]] 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 3.0000
Pile10 Pier_4 [[408, Circle_exist_shaft_Pier, Circle_exist_shaft_Pier]] 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 3.0000 | Pile1 [[0, -1, -1, 0, 0, 0, 0],[306, -1, -1, 0, 0, 0, 0],[612, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile2 [[0, -1, -1, 0, 0, 0, 0],[312, -1, -1, 0, 0, 0, 0],[624, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile3 [[0, -1, -1, 0, 0, 0, 0],[312, -1, -1, 0, 0, 0, 0],[624, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile4 [[0, -1, -1, 0, 0, 0, 0],[264, -1, -1, 0, 0, 0, 0],[528, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile5 [[0, -1, -1, 0, 0, 0, 0],[270, -1, -1, 0, 0, 0, 0],[540, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile6 [[0, -1, -1, 0, 0, 0, 0],[276, -1, -1, 0, 0, 0, 0],[552, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile7 [[0, -1, -1, 0, 0, 0, 0],[234, -1, -1, 0, 0, 0, 0],[468, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile8 [[0, -1, -1, 0, 0, 0, 0],[216, -1, -1, 0, 0, 0, 0],[432, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile9 [[0, -1, -1, 0, 0, 0, 0],[252, -1, -1, 0, 0, 0, 0],[504, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES
Pile10 [[0, -1, -1, 0, 0, 0, 0],[204, -1, -1, 0, 0, 0, 0],[408, -1, -1, -1, -1, -1, -1]] 1000.0000 NO YES |
Pile | |
|---|---|
Section Data (Spreadsheet) | Pile Properties (Spreadsheet) |
[[609.7560000000001, Circle_exist_shaft_EB, Circle_exist_shaft_EB]]
[[615.228, Circle_exist_shaft_EB, Circle_exist_shaft_EB]]
[[620.7, Circle_exist_shaft_EB, Circle_exist_shaft_EB]]
[[524.64, Circle_exist_shaft_EB, Circle_exist_shaft_EB]]
[[538.38, Circle_exist_shaft_EB, Circle_exist_shaft_EB]]
[[552.12, Circle_exist_shaft_EB, Circle_exist_shaft_EB]]
[[465.624, Circle_exist_shaft_Pier, Circle_exist_shaft_Pier]]
[[426.252, Circle_exist_shaft_Pier, Circle_exist_shaft_Pier]]
[[504.20400000000006, Circle_exist_shaft_Pier, Circle_exist_shaft_Pier]]
[[397.908, Circle_exist_shaft_Pier, Circle_exist_shaft_Pier]] | |