Sections [EX1-STG]
- mert.goktas (Unlicensed)
- Cagin Yakar
This part is to inform about the general purposes of section definitions.
Please follow the instructions provided below to set section definitions to be used in this bridge example.
| 1 | Navigate to Properties > Sections | 
|
| 2 | To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section". | |
| 3 | Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle | 
|
| 4 | Enter Width as 60 and Depth as 84 in import section editor. | |
| 5 | Click Import | |
| 6 | Rename this section as HammerHeadSec | |
| 7 | Assign Material as Fc_4ksi (If the material Fc_4ksi is already assigned by default, there is no need to assign it again) | |
| 8 | Repeat the same steps from 2 to 7 for the second rectangular section Enter Width and Depth
Rename this section as HalfHammerHeadSec1 Assign Material as Fc_4ksi |
|
| 9 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as HalfHammerHeadSec2 Assign Material as: Fc_4ksi |
|
| 10 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as ColSec_P2 Assign Material as: Fc_5ksi |
|
| 11 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as ColSec_P3 Assign Material as: Fc_5ksi |
|
| 12 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as PileSec Assign Material as: Fc_5ksi |
|
| 13 | Import another section by selecting
Assign Material as: A709_50W | |
| 14 | Import another section by selecting
OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8 Assign Material as: A709_50W | |
| 15 | Create a new section by defining its name as RigidSection |
|
| 16 | Copy and paste the data below. RigidSection RigidMaterial 6400.0000 6400.0000 6400.0000 3413333.3333 3413333.3333 3413333.3333 0.0000 YES NO NO |
Completed Sections definitions are illustrated below.
Properties >
Please follow the instructions provided below to set rebar detailing for HammerHeadSec.
| 1 | From any cell of the HammerHeadSec row, click on three-dots icon to open Section Editor panel. | |
| 2 | Click + icon at the left top side of the screen. And Select Rebar | |
| 3 | Enter:
Click Add. |
|
| 4 | Click again + icon at the left top side of the screen. |
|
| 5 | The reinforcement identification process will be carried out three times on the bottom reference edge. Select Rebar
Click Add.
| |
| 6 | Repeat the same step for
values. | |
| 7 | Click again + icon at the left top side of the screen. |
|
| 8 | Select Rebar
Click Add. | |
| 9 | Click … icon shown on left middle edge of rebar. Click Points Spreadsheet. Copy the data below. 0.0000 6.0000
-24.3650 -24.0000
-24.3650 24.0000 |
|
| 10 | Paste copied data. | |
| 11 | Click again + icon at the left top side of the screen. |
|
| 12 | Select Rebar
Click Add. | |
| 13 | Click … icon shown on right middle edge of rebar. Click Points Spreadsheet. Copy the data below. 0.0000 6.0000
24.3650 -24.0000
24.3650 24.0000 | |
| 14 | Paste copied data. |
| 1 | From any cell of the HalfHammerHeadSec1 row, click on three-dots icon to open Section Editor panel. | |
| 2 | Click + icon at the left top side of the screen. And Select Rebar | |
| 3 | The reinforcement identification process will be carried out three times on the top reference edge. Enter:
Click Add. |
|
| 4 | Repeat the same step for
values. | |
| 5 | Click again + icon at the left top side of the screen. |
|
| 6 | Select Rebar
Click Add.
| |
| 7 | Click again + icon at the left top side of the screen. |
|
| 8 | Select Rebar
Click Add. | |
| 9 | Click … icon shown on left middle edge of rebar. Click Points Spreadsheet. Copy the data below. |
|
| 10 | Paste copied data. | |
| 11 | Click again + icon at the left top side of the screen. |
|
| 12 | Select Rebar
Click Add. | |
| 13 | Click … icon shown on right middle edge of rebar. Click Points Spreadsheet. Copy the data below. |
|
| 14 | Paste copied data. |
| 1 | From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel. | |
| 2 | Click + icon at the left top side of the screen. And Select Rebar | |
| 3 | The reinforcement identification process will be carried out three times on the top reference edge. Enter:
Click Add. |
|
| 4 | Repeat the same step for
values. | |
| 5 | Click again + icon at the left top side of the screen. |
|
| 6 | Select Rebar
Click Add.
| |
| 7 | Click again + icon at the left top side of the screen. |
|
| 8 | Select Rebar
Click Add. | |
| 9 | Click … icon shown on left middle edge of rebar. Click Points Spreadsheet. Copy the data below. |
|
| 10 | Paste copied data. | |
| 11 | Click again + icon at the left top side of the screen. |
|
| 12 | Select Rebar
Click Add. | |
| 13 | Click … icon shown on right middle edge of rebar. Click Points Spreadsheet. Copy the data below. |
|
| 14 | Paste copied data. |
| 1 | From any cell of the ColSec_P2 row, click on three-dots icon to open Section Editor panel. |
|
| 2 | Click + icon at the left top side of the screen. And Select Rebar | |
| 3 | Enter:
Click Add. |
|
| 4 | Click again + icon at the left top side of the screen. |
|
| 5 | Select Rebar
Click Add.
| |
| 6 | Click again + icon at the left top side of the screen. |
|
| 7 | Select Rebar
Click Add. | |
| 8 | Click again + icon at the left top side of the screen. |
|
| 9 | Select Rebar
Click Add. |
| 1 | From any cell of the ColSec_P3 row, click on three-dots icon to open Section Editor panel. | |
| 2 | Click + icon at the left top side of the screen. And Select Rebar | |
| 3 | Enter:
Click Add. |
|
| 4 | Click again + icon at the left top side of the screen. |
|
| 5 | Select Rebar
Click Add.
| |
| 6 | Click again + icon at the left top side of the screen. |
|
| 7 | Select Rebar
Click Add. | |
| 8 | Click again + icon at the left top side of the screen. |
|
| 9 | Select Rebar
Click Add. |