/
Bottom Reinforcement [EX2]

Bottom Reinforcement [EX2]

Owned by mert.goktas (Unlicensed)
Last updated: Jun 14, 2023
2 min read

Please follow the instructions provided below to Bottom Reinforcements design of slab

Table 1: Uniform Reinforcement

 

 

 

 

 

 

Table 2: Additional Reinforcement

 

 

 

Table 2: Integrity Bottom Bar

 

 

 

 

https://bim.aecbolt.com/objidgt3v4wspwk411v3ko1dfk.libobj?values=DeadL:69038.0331445064%7CSuperDeadL:10873.5775261752%7CLiveL:25640.4329101528%7CBottomMatBarSize:0.625%7CBottomMatBar_Area:0.31%7CFy_LongReinf:60000%7CLongitudinalBarSize:1%7CWidthInternal:18%7CDepthInternal:12%7CAdditionalRebarsDir1:1%7CAdditionalRebarsDir2:2%7CIBBBarSize:0.625%7CIBBBar_Area:0.31%7CAggregateSize_Input:1%7CReportMode:1&view=docs

 

Structural Integrity Combination calculation of AEC|Bolt Report

 

CAD Drawing of AEC|Bolt Report

 

The “Bottom Reinforcement” part is completed in this step.

You can proceed to the “Punching Shear” section.

Related content

Slab Design [EX2*]
Slab Design [EX2*]
Building Design Suite
More like this
3.2 Slab Design
3.2 Slab Design
Building Design Suite
Read with this
Bottom Slab Reinforcements
Bottom Slab Reinforcements
Building Design Suite
More like this
2.1 Slab Analysis
2.1 Slab Analysis
Building Design Suite
Read with this
Top Reinforcements [EX2]
Top Reinforcements [EX2]
Building Design Suite
More like this
Slab Analysis Results [EX2]
Slab Analysis Results [EX2]
Building Design Suite
Read with this