Cross Frame Code Check Template [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
- mert.goktas (Unlicensed)
After clicking on ‘Templates for Code Check and Load Rating> Cross Frame Code Check' in the navigation treeview, follow the steps to define the Cross Frame Code Check Template. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click on Name cell and set name as CFrameCCT. |
|
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the load combination table is define in the next step. |  |
| 3 | ||
| 4 | Click the three-dots icon on the Load Combination Table cell, and then set SuperstructureLCT. |
|
| 5 | Go to the Fatigue Parameters tab. Set ADTT to 1250 and Number of Lanes Available to Trucks to 3. Leave the rest of the parameters as default. |
|
| 6 |
|
|
| 7 | Proceed to the next step to verify the model. | |
The completed cross frame code check template is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.