Pier Cap Code Check T [EX1-STG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to create Pier Cap code check
| 1 | Navigate Templates for Code Check > Pier Cap Code Check |  |
| 2 | For Pier Cap code check, 1 Load Combination Tables must be defined. | |
| 3 | Click three-dots icon on Load Combination Table and set SubstructureLCT. Since the Pier Cap is a substructure element, the appropriate Load Combination Table to assign would be "SubstructureLCT". |  |
| 4 | Keep other parameters constant as follows.
|
|
| 5 | “Procedures for Shear Resistance Parameters ß and θ ..”: Generalized | |
| 6 | “Include acxial effects on flexure and shear computation?” : Yes | |
| 7 | “Flexure Sign (Effective Shear Depth)”: Use Critical Shear Concurrent Bending Moment |
| 1 | Navigate to Pier Cap Code Check under Templates for Code Check on the tree view. |
| 2 | Copy General from model inputs and paste into OpenBrIM. |
The Pier Cap Code Check have been created.
Pier Cap Code Check |
|---|
General |
PCCCT1 SubstructureLCT Generalized Yes Use Critical Shear Concurrent Bending Moment |