Field Splice Code Check T [EX1-STG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to create Field Splice code check.
| 1 | Navigate Templates for Code Check > Field Splice Code Check |  |
| 2 | For Internal Cross Frame code check, 1 Load Combination Tables must be defined. | |
| 3 | Click three-dots icon on Load Combination Table and set SuperstructureLCT. Since the Field Splice is a superstructure element, the appropriate Load Combination Table to assign would be "SuperstructureLCT". |  |
| 4 | Navigate to Bridge Parameters tab. You can make adjustments to the "Design Parameters” tab if you wish. Keep the “Design Parameters” as default (60 kip/in2) for this case. |
| 1 | Navigate to Field Splice Code Check under Templates for Code Check on the tree view. |
| 2 | Copy Params and Design Parameters from model inputs and paste into OpenBrIM. |
The Field Splice Code Check have been created.
Field Splice Code Check | |
|---|---|
Params | Design Parameters |
FSCCTTG1 SuperstructureLCT | FSCCTTG1 60 |