Internal Diaphragm [EX1-STG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to create Internal Diapgrahm.
| 1 | Navigate to Bracing > Internal Diaphragm | 
|
| 2 | To define "Internal Diaphragm" inside Tub Girders: Click three-dots icon on Girder cell and set the Tub Girder which the inner Diaphragm will be located | |
| 3 | The Internal Diaphragms will be placed at the same station as the External Diaphragms. Therefore, it can be inferred that there are a total of 10 Internal Diaphragms in this case. |
|
| 4 | Enter in Location parameters, such as the Skew Angle, Station, materials and selecting just as in the External Diaphragm's value. | |
| 5 | You can make adjustments to the "Section Details" and "3D Details" tabs if you wish. |
| 1 | Navigate to Internal Diaphragm under Bracing on the tree view. |
| 2 | Copy Location, Section Details and 3D Details from model inputs and paste into OpenBrIM. |
The Internal Diaphragm that have been created are illustrated below.
External Diaphragm | ||
|---|---|---|
Location | Section Details | 3D Details |
INTDIA1 [G1] 0 Pier-End 10 Abut1 1.5 A709_50W
INTDIA2 [G1] 0 Pier-End 10 Pier2 0 A709_50W
INTDIA3 [G1] 0 Pier-End 10 Pier3 0 A709_50W
INTDIA4 [G1] 0 Pier-End 10 Abut4 -1.5 A709_50W
INTDIA5 [G1] 0 Intermediate 260 NULL 0 A709_50W
INTDIA6 [G2] 0 Pier-End 10 Abut1 1.5 A709_50W
INTDIA7 [G2] 0 Pier-End 10 Pier2 0 A709_50W
INTDIA8 [G2] 0 Pier-End 10 Pier3 0 A709_50W
INTDIA9 [G2] 0 Pier-End 10 Abut4 -1.5 A709_50W
INTDIA10 [G2] 0 Intermediate 260 NULL 0 A709_50W | INTDIA1 YES NO 1 15 1 1 15 1 1
INTDIA2 YES NO 1 15 1 1 15 1 1
INTDIA3 YES NO 1 15 1 1 15 1 1
INTDIA4 YES NO 1 15 1 1 15 1 1
INTDIA5 YES NO 1 15 1 1 15 1 1
INTDIA6 YES NO 1 15 1 1 15 1 1
INTDIA7 YES NO 1 15 1 1 15 1 1
INTDIA8 YES NO 1 15 1 1 15 1 1
INTDIA9 YES NO 1 15 1 1 15 1 1
INTDIA10 YES NO 1 15 1 1 15 1 1 | INTDIA1 4 YES
INTDIA2 4 YES
INTDIA3 4 YES
INTDIA4 4 YES
INTDIA5 4 YES
INTDIA6 4 YES
INTDIA7 4 YES
INTDIA8 4 YES
INTDIA9 4 YES
INTDIA10 4 YES |