Point [EX1-PIG]

Please follow the instructions provided below add to the corresponding load definitions

1	Navigate to Load Geometry Definitions > Surface > Point
2	Click three-dots icon on Bridge cell and set “Bridge1”.
3	Set the name as G1_Sp1b Enter Longitudinal & Transverse Distance from Reference Point value as in the figure.
4	Repeat the previous steps to define the nodes of all available point loads in the project, use the parameters provided in the figure.

https://openbrim.atlassian.net/wiki/spaces/OBrIM/pages/2185822355

1	Navigate to Point under Load Geometry Definitions on the tree view.
2	Copy Geometry from model inputs and paste into OpenBrIM.

Point

Point

Geometry

G4_Sp1b	Bridge1	23847.37	-3.24
G5_Sp1b	Bridge1	23846.60	4.42
G6_Sp1b	Bridge1	23845.82	12.08
G7_Sp1b	Bridge1	23845.05	19.73
G4_Sp2b	Bridge1	23898.78	-5.77
G5_Sp2b	Bridge1	23898.30	-0.67
G6_Sp2b	Bridge1	23897.83	4.44
G7_Sp2b	Bridge1	23897.36	9.55
G8_Sp2b	Bridge1	23896.89	14.66
G9_Sp2b	Bridge1	23896.41	19.76
G4_Sp3b	Bridge1	23985.80	-3.31
G5_Sp3b	Bridge1	23982.45	4.26
G6_Sp3b	Bridge1	23981.10	11.83
G7_Sp3b	Bridge1	23979.75	19.39
G4_Sp1e	Bridge1	23896.70	-3.23
G5_Sp1e	Bridge1	23895.99	4.44
G6_Sp1e	Bridge1	23895.28	12.10
G7_Sp1e	Bridge1	23894.57	19.76
G4_Sp2e	Bridge1	23982.29	-5.86
G5_Sp2e	Bridge1	23981.49	-0.81
G6_Sp2e	Bridge1	23980.59	4.24
G7_Sp2e	Bridge1	23979.69	9.29
G8_Sp2e	Bridge1	23978.79	14.34
G9_Sp2e	Bridge1	23977.89	19.39
G4_Sp3e	Bridge1	24026.67	-2.96
G5_Sp3e	Bridge1	24024.72	4.47
G6_Sp3e	Bridge1	24022.78	11.91
G7_Sp3e	Bridge1	24020.83	19.34
G3_Sp1b_e	Bridge1	23848.15	-10.90
G3_Sp1e_e	Bridge1	23897.41	-10.89
G3_Sp2b_e	Bridge1	23899.25	-10.88
G3_Sp2e_e	Bridge1	23983.29	-10.90
G3_Sp3b_e	Bridge1	23985.15	-10.88
G3_Sp3e_e	Bridge1	24028.62	-10.40

OpenBrIM

Point [EX1-PIG]

Analytics

Related content