Rectangular [EX1-STG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to add foundation.
| 1 | Navigate to Foundation > Rectangular. | 
|
| 2 | Click three-dots icon on Substructure. Set Column1 and Column2 | |
| 3 | Enter Footing Width, Footing Length and Longitudinal Offset data as in the figure. | 
|
| 4 | Click three-dots icon on Material and set a concrete material as Fc_5ksi for Rectangular footings. |
|
| 5 | Navigate to FEM tab and select a RigidSection for Rigid Section. |
|
| 6 | Longitudinal Offset = It offsets the foundation along the alignment. Transverse Offset = It offsets the foundation on the y-axis perpendicular to the alignment. Rotation = It rotates the XY plane. | |
Navigate to Rectangular under Foundation on the tree view. |
Copy Footing from model inputs and paste into OpenBrIM. |
Navigate to FEM under Rectangular on the tree view. |
Copy FEM data from model inputs and paste into OpenBrIM. |
The Rectangular Footing that have been created are illustrated below.
Rectangular | |
|---|---|
Footing | FEM |
RF1 [Column1] 22 16 6 0 0 Fc_5ksi 0
RF2 [Column2] 22 16 6 0 0 Fc_5ksi 0 | RF1 Yes RigidSection 10 3 4
RF2 Yes RigidSection 10 3 4 |