Pile Capacity Check [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
- mert.goktas (Unlicensed)
After clicking on ‘Substructure Code Checks> Pile Capacity Check' in the navigation treeview, follow the steps to define the Pile Capacity Check. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click three-dots icon on Pile Cap cell and select a Pile Cap as Footing1. |   |
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the template is defined in the next step. | |
| 3 | ||
| 4 | Click the three-dots icon on the Template cell, and then set PileCapacityCCT. | |
| 5 | Set name as PileCapacityCC. | |
| 6 | Proceed to the next step to verify the model. | |
The completed pile capacity check is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.