Surface Load [EX1-PIG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to add Surface Load
Navigate to Loads > Surface Load |  |
Click on the three-dots icon in the surface cell, and set Span1DeckSurface to identify the construction stages that have a surface load. | |
Define surface loads for each span in the project. Then enter the names. |  |
Click three-dots icon on Stage cell and click select.
Enter the stage data as follows:
|
|
Enter the magnitudes of the (Surface) Loads to be applied on Surface as in the figure. | |
In this cell, set the Element's object, which indicates which surface load will be applied to each surface. |
| 1 | Navigate to Surface Load under Loads on the tree view. |
| 2 | Copy General from model inputs and paste into OpenBrIM. |
Surface Load |
|---|
General |
SIPLoad_Sp1 Span1DeckSurface DeckConstPour 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Deck
SIPLoad_Sp2 Span2DeckSurface DeckConstPour 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Deck
SIPLoad_Sp3 Span3DeckSurface DeckConstPour 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Deck |