Cross-Section [EX1-PIG]
- mert.goktas (Unlicensed)
- Cagin Yakar
Please follow the instructions provided below to define deck cross-sections.
| 1 | If the section of your deck varies from the beginning to the end of your project, you should define at least two cross-sections.
In this specific project, the decks undergo changes in their cross-section from the start to the end. Consequently, it is essential to define more than one cross-section to accommodate these variations.
| |
| 2 | Navigate to Deck > Cross Section | 
|
| 3 | Let's define six different cross sections for this project. To do this, navigate to the first cell in the Name column and enter "CS1" as the name. Then, add it to the list. | |
| 4 | Enter all Cross Section values as in the figure |  |
| 1 | Navigate to Cross Section under Deck on the tree view. |
| 2 | Copy Deck Cross Section from model inputs and paste into OpenBrIM. |
The Cross Section that have been created.
Cross Section |
|---|
Deck Cross Section |
CS1 13.4400 21.1000 8.0000 8.0000 8.0000
CS2 13.4400 22.1000 8.0000 8.0000 8.0000
CS3 13.4400 22.1000 8.0000 8.0000 8.0000
CS4 13.4400 21.9000 8.0000 8.0000 8.0000
CS5 13.4400 21.9000 8.0000 8.0000 8.0000
CS6 13.4400 21.6000 8.0000 8.0000 8.0000 |