Internal Diaphragm [EX1-CUG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to create Custom Diapgrahm.
| 1 | Navigate to Diaphragm > Internal Diaphragm
| 
 |
| 2 | Incorporating a diaphragm within the Concrete U Girders will mitigate these stabilization issues. Consequently, an "Internal Diaphragm" will be specified for each bearing location of the "Concrete U Girders". | |
| 3 | Click on three dots icon in the Girder cell, and select “CUG1” (Concrete U Girder) This action will unveil the parameters associated with the Internal Diaphragm within the spreadsheet. | |
| 4 | Enter the "Girder" and "Station" values for all the "Internal Diaphragms" that you intend to establish within the project. | 
|
| 5 | Provide the thickness value for all the “Internal Diaphragms”. Maintain the Start & End Skew parameters at a value of 0. |  |
| 6 | Assign the material type for all Internal Diaphragms as in the figure. | 
|
| 1 | Navigate to Internal Diaphragm under Diaphragm on the tree view. |
| 2 | Copy Internal Diaphragm from model inputs and paste into OpenBrIM. |
The Internal Diaphragm that have been created are illustrated below.
Internal Diaphragm |
|---|
Internal Diaphragm |
IDCUG1 CUG1 0.00 24.00 0.00 0.00 Fc_4ksi
IDCUG2 CUG1 150.00 24.00 0.00 0.00 Fc_4ksi
IDCUG3 CUG1 300.00 24.00 0.00 0.00 Fc_4ksi
IDCUG4 CUG1 450.00 24.00 0.00 0.00 Fc_4ksi
IDCUG5 CUG2 0.00 24.00 0.00 0.00 Fc_4ksi
IDCUG6 CUG2 150.00 24.00 0.00 0.00 Fc_4ksi
IDCUG7 CUG2 300.00 24.00 0.00 0.00 Fc_4ksi
IDCUG8 CUG2 450.00 24.00 0.00 0.00 Fc_4ksi |