...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of substructure bridge components. |
...
...
Select a Stage at Superstructure Connection Construction tab as GirderStage.
...
...
Pick Insertion Points.
...
...
Click all the Insertion Points.
...
...
Click Done.
...
Proceed with Pier Cap/End Bent (Complete).
...
...
Select a Stage as SubstrConstStage.
...
Pick Pier Caps.
...
...
Click on PierCap1 and PierCap2.
...
Click Done.
...
Set Self Weight Factor to 1.
...
...
Proceed with Pier Column.
...
Select a Stage as SubstrConstStage.
...
Pick Columns.
...
...
Click on all the columns.
...
Click Done.
...
Set Self Weight Factor to 1.
...
...
Proceed with Foundation (Complete).
...
Select a Stage as SubstrConstStage.
...
Pick Foundation.
...
...
Click on all the foundations.
...
Click Done.
...
Set Self Weight Factor to 1.
...
...
Proceed with Pile.
...
Select a Stage as SubstrConstStage.
...
Pick Substructures Above.
...
Click on all the foundations.
...
Click Done.
...
Set Individual Piles as Empty.
...
...
Set Self Weight Factor to 1.
...
Go to Bearing under Substructure on the tree view.
...
Copy Superstructure Connection Construction from model inputs and paste into OpenBrIM.
...
Go to Pier Cap/End Bent (Complete) under Substructure on the tree view.
...
Copy Pier Cap Construction from model inputs and paste into OpenBrIM.
...
Go to Pier Column under Substructure on the tree view.
...
Copy Pier Column Construction from model inputs and paste into OpenBrIM.
...
Go to Foundation (Complete) under Substructure on the tree view.
...
Copy Foundation Construction from model inputs and paste into OpenBrIM.
...
Go to Pile under Substructure on the tree view.
...
Copy Pile Construction from model inputs and paste into OpenBrIM.
...
Bearing
...
Superstructure Connection Construction
| Code Block |
|---|
SCC1 GirderStage [IP8,IP7,IP6,IP5,IP4,IP3,IP2,IP1,IP12,IP11,IP10,IP9,IP16,IP15,IP14,IP13] |
...
Pier Cap/End Bent (Complete)
...
Pier Cap Construction
| Code Block |
|---|
PCC1 SubstrConstStage [PierCap1,PierCap2] 1 |
...
Pier Column
...
Pier Column Construction
| Code Block |
|---|
PCC2 SubstrConstStage [PierColumn1,PierColumn2,PierColumn3,PierColumn4,PierColumn5] 1 |
...
Foundation (Complete)
...
Foundation Construction
| Code Block |
|---|
FC1 SubstrConstStage [Footing1,Footing2] 1 |
...
Pile
Pile Construction
...
| Info |
|---|
After clicking on ‘Construction> Substructure Construction> Pile Construction' in the navigation treeview, follow the steps to define the Pile Construction. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Pile Construction [SIG] |
| 1 | 🖱️ Click three-dots icon on Stage cell and select a Construction Stage as SubstrConstStage. |    |
| 2 | 🖱️ Click three-dots on the cell of the All Piles under Substructure and pick all the foundations. |    |
| 3 | 🖱️ Keep the Individual Piles and Self Weight Factor as default. |  |
| 4 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed pile construction is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...