...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of substructure bridge components. |
...
Proceed with Pile Construction.
...
Select a Stage as SubstrConstStage.
...
Pick Substructures Above.
...
Click on all the foundations.
...
Click Done.
...
Set Individual Piles as Empty.
...
Set Self Weight Factor to 1.
...
Go to Pile Construction under Substructure Construction on the tree view.
...
Copy Pile Construction from model inputs and paste into OpenBrIM.
...
Pile
Pile Construction
...
| Info |
|---|
After clicking on ‘Construction> Substructure Construction> Pile Construction' in the navigation treeview, follow the steps to define the Pile Construction. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Pile Construction [SIG] |
| 1 |
|    |
| 2 |
|    |
| 3 |
|  |
| 4 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed pile construction is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...