TASK 1 DUE DATE 01/06/22

You are responsible to create the objects responding to following precast I girder example
Link: https://www.fdot.gov/docs/default-source/structures/structuresmanual/currentrelease/precastbeamexample.pdf
Following structural elements with the expected parameters should be created
- Bearing Axes
  - Station
- Bearings
  - Axis Location
  - Bearing Width
  - Bearing Length
  - Bearing Thickness
- Precast I girder
  - Girder Material
  - Girder Section
  - Pick Bearings
- Deck

Fig.1 Expected View of the Structural Components

Any parameters those are listed or not are welcome if the logic behind the setting up the superstructure works all right. So, parameter selection is totally up to author. The related dimensions are given in the document. FIB-360 listed in the example was shown below

Fig.2 FIB-360 Dimensions

Please send the links of the objects and the application that you created according to example. If you have any questions about the project, do not hesitate to contact
Author’s Guide : https://sites.google.com/a/redeqn.com/paramml-author-s-guide/