After clicking on 'Superstructure> Stiffeners> Transverse Stiffener' in the navigation treeview, follow the steps to define the Transverse Stiffener. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | 🖱️ Click the three-dots icon on the Girder cell, and then set G4. |  | |
| 2 | 🖱️ Enter the Station as 130.2414. |  | |
| 3 | 🖱️ Keep the Side of Web as default. | ||
| 4 | 🖱️ Click three-dots icon on Material cells and select a Material as A709 50W. |    | |
| 5 |
| ||
| 6 | 🖱️ Keep the Dimension, 3D Detailing and FEM as default. |    | |
| 7 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  | |
| 8 | To model all the Transverse Stiffener, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | ||
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
|---|
Transverse Stiffener |
|---|
General STFT1 G4 130.2414 Both A709_50W STFT3 G4 90.2414 Both A709_50W |
The completed transverse stiffeners are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.
Click on the arrow button above the Analysis button located in the upper-left corner of the OpenBrIM screen.  Click on the Model button on the screen that opens up. 
|
|---|
To view the entire procedure explained on this page, please watch the recorded Video below.
Add Comment