Follow the next steps to define construction of substructure bridge components.
| 1 | Go to Loading/Construction/Substructure, click Bearing. |  |
| 2 | Select a Stage at Superstructure Connection Construction tab as GirderStage. |  |
| 3 | Pick Insertion Points. |  |
| 4 | Click all the Insertion Points. |  |
| 5 | Click Done. | |
| 6 | Proceed with Pier Cap/End Bent (Complete). |   |
| 7 | Select a Stage as SubstrConstStage. | |
| 8 | Pick Pier Caps. |   |
| 9 | Click on PierCap1 and PierCap2. | |
| 10 | Click Done. | |
| 11 | Set Self Weight Factor to 1. |  |
| 12 | Proceed with Pier Column. |  |
| 13 | Select a Stage as SubstrConstStage. | |
| 14 | Pick Columns. |  |
| 15 | Click on all the columns. | |
| 16 | Click Done. | |
| 17 | Set Self Weight Factor to 1. |  |
| 18 | Proceed with Foundation (Complete). |  |
| 19 | Select a Stage as SubstrConstStage. | |
| 20 | Pick Foundation. |  |
| 21 | Click on all the foundations. | |
| 22 | Click Done. | |
| 23 | Set Self Weight Factor to 1. |  |
| 24 | Proceed with Pile. |  |
| 25 | Select a Stage as SubstrConstStage. | |
| 26 | Pick Substructures Above. | |
| 27 | Click on all the foundations. | |
| 28 | Click Done. | |
| 29 | Set Individual Piles as Empty. |  |
| 30 | Set Self Weight Factor to 1. |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Go to Bearing under Substructure on the tree view. |
| 2 | Copy Superstructure Connection Construction from model inputs and paste into OpenBrIM. |
| 3 | Go to Pier Cap/End Bent (Complete) under Substructure on the tree view. |
| 4 | Copy Pier Cap Construction from model inputs and paste into OpenBrIM. |
| 5 | Go to Pier Column under Substructure on the tree view. |
| 6 | Copy Pier Column Construction from model inputs and paste into OpenBrIM. |
| 7 | Go to Foundation (Complete) under Substructure on the tree view. |
| 8 | Copy Foundation Construction from model inputs and paste into OpenBrIM. |
| 9 | Go to Pile under Substructure on the tree view. |
| 10 | Copy Pile Construction from model inputs and paste into OpenBrIM. |
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Bearing |
|---|
Superstructure Connection Construction SCC1 GirderStage [IP8,IP7,IP6,IP5,IP4,IP3,IP2,IP1,IP12,IP11,IP10,IP9,IP16,IP15,IP14,IP13] |
Pier Cap/End Bent (Complete) |
|---|
Pier Cap Construction PCC1 SubstrConstStage [PierCap1,PierCap2] 1 |
Pier Column |
|---|
Pier Column Construction PCC2 SubstrConstStage [PierColumn1,PierColumn2,PierColumn3,PierColumn4,PierColumn5] 1 |
Foundation (Complete) |
|---|
Foundation Construction FC1 SubstrConstStage [Footing1,Footing2] 1 |
Pile |
|---|
Pile Construction PC1 SubstrConstStage [Footing1,Footing2] [] 1 |
0 Comments