...
→ Select rebar number and enter the spacing data of reinforcement layers in the spreadsheet.
→ Click Show cell in the spreadsheet to select the uniform reinforcement region in AutoCAD as demonstrated in Figure 2.
→ Click N/Showing Additional Rebar Zones button as shown in Figure 1 to see the additional reinforcement demand regions in the slab plan as illustrated in Figure 3.
...
Additional rebars must be drawn from support face to support face and in order to calculate the contribution of additional reinforement reinforcement to capacity, rebar region should be drawn.
...
Select bar diameter and code check template for inregrity integrity bottom bar as demonstrated in Figure 6. See Design Criteria to learn how to set code check templates. See Design Templates to learn how to set the analysis source of IBB code check.
Enter additonal additional rebar to add integrity rebars.
→ Click Verify All to run the code check for all the columns in the floor plan.
→ Clicl Click Verify Selected and select columnsto run the code check for the selected columns.
...
Figure 6
Status The status of each column will be set as passed or failed when the code check is completed. Click Show cell to see the detailed report.
...