...
| Excerpt |
|---|
Figure 1 → Click Slab Edge button as shown in Figure 1 to draw slab.  Figure 2 → Click Slab Piece button as shown in Figure 1 to draw areas which have different properties in slab edge.  Figure 3  Figure 5 All the properties of slab edge and slab piece are zero when they first drawn. User must edit all the properties from slab spreadsheet as shown in Figure 5. Material must be selected for all slab objects because it is a necessary information for analysis. User can select material from the slab spreadsheet as shown above. Clear cover of top slab reinforcement edits and clear cover of bottom slab reinforcement edits are made from slab spreadsheet as illustrated in Figure 5. Also user can select a default slab material from 1st floor section or general Stories section as shown in Figure 6 and Figure 7  Figure 6  Figure 7 → Click Design Strip to draw the directions of the design strips for slab design. → Draw direction 1 and then direction 2 which is perpendicular to direction 1 will automatically be drawn.  Figure 8 User can set the same design strip for all stories as shown in Figure 8. |
...
Figure 1
→ Click Slab Edge button as shown in Figure 1 to draw slab.
...
Also user can select a default slab material from 1st Floorfloor section or general Stories section as shown in Figure 6 and Figure 7
...