| Info |
|---|
Please follow the instructions provided below to add Custom barriers to Left sides of the bridge. |
| 1 | Navigate to Superstructure Attachments > F Shape Barrier |
|
| 2 | In the project, no barrier definition has been made for the left side of the deck. To define a custom barrier for the left side of the deck, click three-dots icon on Deck cell and set Span1. | |
| 3 | The "section" parameters we defined in the previous steps will be utilized for the barrier. In this step, the "Exist_Barrier_sw" section, along with its required details and parameters, will be used for the barrier definition. |
|
| 4 | Please assign the section value to "exist" for the Custom Barrier. | |
| 5 | Enter Start Transverse Location and End Transverse Location as -160.43 |  |
| 6 | Enter the name of the Custom Barrier as “CustBar1” | |
| 7 | To create F barriers for the 2nd and 3rd spans please follow the previous steps and repeat them accordingly. |  |
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to Custom under Superstructure Attachments on the tree view. |
| 2 | Copy Barrier from model inputs and paste into OpenBrIM. |
| Tip |
|---|
The Custom Barrier that have been created are illustrated below. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
Custom Barrier | |||||
|---|---|---|---|---|---|
Barrier | |||||
|