...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of substructure bridge components. |
| 1 | Go to Loading/Construction/Substructure,click Bearing. | |
| 2 | Select a Stage at Superstructure Connection Construction tab as GirderStage. |  |
| 3 | Pick Insertion Points. |  |
| 4 | Click all the Insertion Points. |  |
| 5 | Click Done. | |
| 6 | Proceed with Pier Cap/End Bent (Complete). |   |
| 7 | Select a Stage as SubstrConstStage. | |
| 8 | Pick Pier Caps. |   |
| 9 | Click on PierCap1 and PierCap2. | |
| 10 | Click Done. | |
| 11 | Set Self Weight Factor to 1. |  |
| 12 | Proceed with Pier Column. |  |
| 13 | Select a Stage as SubstrConstStage. | |
| 14 | Pick Columns. |  |
| 15 | Click on all the columns. | |
| 16 | Click Done. | |
| 17 | Set Self Weight Factor to 1. |  |
| 18 | Proceed with Foundation (Complete). |  |
| 19 | Select a Stage as SubstrConstStage. | |
| 20 | Pick Foundation. |  |
| 21 | Click on all the foundations. | |
| 22 | Click Done. | |
| 23 | Set Self Weight Factor to 1. |  |
| 24 | Proceed with Pile. |  |
| 252 | Select a Stage as SubstrConstStage. | |
| 263 | Pick Substructures Above. | |
| 274 | Click on all the foundations. | |
| 285 | Click Done. | |
| 296 | Set Individual Piles as Empty. |  |
| 307 | Set Self Weight Factor to 1. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Go to Bearing Pile under Substructure on the tree view. | ||
| 2 | Copy Superstructure Connection Construction from model inputs and paste into OpenBrIM. | ||
| 3 | Go to Pier Cap/End Bent (Complete) under Substructure on the tree view. | ||
| 4 | Copy Pier Cap Construction from model inputs and paste into OpenBrIM. | ||
| 5 | Go to Pier Column under Substructure on the tree view. | ||
| 6 | Copy Pier Column Construction from model inputs and paste into OpenBrIM. | ||
| 7 | Go to Foundation (Complete) under Substructure on the tree view. | ||
| 8 | Copy Foundation Construction from model inputs and paste into OpenBrIM. | ||
| 9 | Go to Pile under Substructure on the tree view. | 10 | Copy Pile Construction from model inputs and paste into OpenBrIM. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
Bearing
...
Superstructure Connection Construction
| Code Block |
|---|
SCC1 GirderStage [IP8,IP7,IP6,IP5,IP4,IP3,IP2,IP1,IP12,IP11,IP10,IP9,IP16,IP15,IP14,IP13] |
...
Pier Cap/End Bent (Complete)
...
Pier Cap Construction
| Code Block |
|---|
PCC1 SubstrConstStage [PierCap1,PierCap2] 1 |
...
Pier Column
...
Pier Column Construction
| Code Block |
|---|
PCC2 SubstrConstStage [PierColumn1,PierColumn2,PierColumn3,PierColumn4,PierColumn5] 1 |
...
Foundation (Complete)
Foundation Construction
...
Pile | ||
|---|---|---|
Pile Construction
|
...