Content Comparison

...

Panel

Follow the next steps to define construction of substructure bridge components.

1	Go to Loading/Construction/Substructure,click Bearing.
2	Select a Stage at Superstructure Connection Construction tab as GirderStage.
3	Pick Insertion Points.
4	Click all the Insertion Points.
5	Click Done.
6	Proceed with Pier Cap/End Bent (Complete).
7	Select a Stage as SubstrConstStage.
8	Pick Pier Caps.
9	Click on PierCap1 and PierCap2.
10	Click Done.
11	Set Self Weight Factor to 1.
12	Proceed with Pier Column.
13	Select a Stage as SubstrConstStage.
14	Pick Columns.
15	Click on all the columns.
16	Click Done.
17	Set Self Weight Factor to 1.
18	Proceed with Foundation (Complete).
19	Select a Stage as SubstrConstStage.
20	Pick Foundation.
21	Click on all the foundations.
22	Click Done.
23	Set Self Weight Factor to 1.
24	Proceed with Pile.
25	Select a Stage as SubstrConstStage.
26	Pick Substructures Above.
27	Click on all the foundations.
28	Click Done.
29	Set Individual Piles as Empty.
30	Set Self Weight Factor to 1.