Content Comparison

...

Panel

Follow the next steps to define construction of substructure bridge components.

Click on PierCap1 and PierCap2.

1	Go to Loading/Construction/Substructure,click Bearing.
2	Select a Stage at Superstructure Connection Construction tab as GirderStage.
3	Pick Insertion Points.
4	Click all the Insertion Points.
5	Click Done.
6	Proceed with Pier Cap/End Bent (Complete).	Image RemovedImage Removed
7	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
8	Pick Pier Caps.	Image RemovedImage Removed
9			10	Click Done.
11	Set Self Weight Factor to 1.		Image Removed
12	Proceed with Pier Column.	Image RemovedImage Removed
13	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
14	Pick Columns.	Image Removed
15	Click on all the columns.
16	Click Done.
17	Set Self Weight Factor to 1.	Image Removed
18	Proceed with Foundation (Complete).	Image RemovedImage Removed
19	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
20	Pick Foundation.	Image Removed
21	Click on all the foundations.
22	Click Done.
23	Set Self Weight Factor to 1.	Image Removed
24	Proceed with Pile.	Image RemovedImage Removed
25	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
26	Pick Substructures Above.	Image Removed
27	Click on all the foundations.
28	Click Done.
29	Set Individual Piles as Empty.	Image Removed
30	Set Self Weight Factor to 1.	Image Removed

...

Insert excerpt

5

1	Go to Bearing under Substructure on the tree view.
2	Copy Superstructure Connection Construction from model inputs and paste into OpenBrIM.
3	Go to Pier Cap/End Bent (Complete) under Substructure on the tree view.
4	Copy Pier Cap Construction from model inputs and paste into OpenBrIM.	Go to Pier Column under Substructure on the tree view.
6	Copy Pier Column Construction from model inputs and paste into OpenBrIM.
7	Go to Foundation (Complete) under Substructure on the tree view.
8	Copy Foundation Construction from model inputs and paste into OpenBrIM.
9	Go to Pile under Substructure on the tree view.
10	Copy Pile Construction from model inputs and paste into OpenBrIM.

...

Anchor

	ModelInputs
	ModelInputs

...

Bearing

Superstructure Connection Construction

Code Block
SCC1 GirderStage [IP8,IP7,IP6,IP5,IP4,IP3,IP2,IP1,IP12,IP11,IP10,IP9,IP16,IP15,IP14,IP13]

Pier Cap/End Bent (Complete)

Pier Cap Construction

Code Block
PCC1 SubstrConstStage [PierCap1,PierCap2] 1

Pier Column

Pier Column Construction

Code Block
PCC2 SubstrConstStage [PierColumn1,PierColumn2,PierColumn3,PierColumn4,PierColumn5] 1

Foundation (Complete)

Foundation Construction

Code BlockFC1 SubstrConstStage [Footing1,Footing2

1

Pile

Pile Construction

Code BlockPC1 SubstrConstStage [Footing1,Footing2] [] 1

Versions Compared