...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of substructure bridge components. |
| 1 | Go to Loading/Construction/SuperstructureSubstructure,click Deck Bearing. | -20221008-104607.png?version=1&modificationDate=1665342970445&cacheVersion=1&api=v2)  | |
| 2 | Deck pouring and hardening are the states of deck construction stage and should be specified here. | ||
| 3 | Go to Deck Casting tab. |  | |
| 4 | Specify names of the deck construction stages in Name. | ||
| 5 | Select pouring stages in Pouring Stage (Weight Only) and hardening stages in Hardening Stage (Gains Stiffness). |   Select a Stage at Superstructure Connection Construction tab as GirderStage. |  |
| 3 | Pick Insertion Points. |  | |
| 4 | Click all the Insertion Points. |  | |
| 5 | Click Done. | ||
| 6 | Proceed with Pier Cap/End Bent (Complete). |   | |
| 7 | Select a Stage as SubstrConstStage. | ||
| 8 | Pick Pier Caps. |   | |
| 9 | Click on PierCap1 and PierCap2. | ||
| 10 | Click Done. | ||
| 11 | Set Self Weight Factor to 1. |  | |
| 12 | Proceed with Pier Column. |  | |
| 13 | Select a Stage as SubstrConstStage. | ||
| 14 | Pick Columns. |  | |
| 15 | Click on all the columns. | ||
| 16 | Click Done. | ||
| 17 | Set Self Weight Factor to 1. |  | |
| 18 | Proceed with Foundation (Complete). |  | |
| 19 | Select a Stage as SubstrConstStage. | ||
| 20 | Pick Foundation. |  | |
| 21 | Click on all the foundations. | ||
| 22 | Click Done. | ||
| 23 | Set Self Weight Factor to 1. |  | |
| 24 | Proceed with Pile. |  | |
| 25 | Select a Stage as SubstrConstStage. | ||
| 26 | Pick Substructures Above. | | |
| 27 | Click on all the foundations. | ||
| 28 | Click Done. | ||
| 29 | Set Individual Piles as Empty. |  | |
| 30 | Set Self Weight Factor to 1. | ||
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Go to Deck Bearing under Superstructure Substructure on the tree view. | |
| 2 | Copy Deck Casting, Longitudinal and Transverse Superstructure Connection Construction from model inputs and paste into OpenBrIM. | |
| 3 | Go to Girder Erection Pier Cap/End Bent (Complete) under Superstructure Substructure on the tree view. | |
| 4 | Copy Girder Pier Cap Construction from model inputs and paste into OpenBrIM. | |
| 5 | Go to Superstructure Attachment Construction under SuperstructureGo to Pier Column under Substructure on the tree view. | |
| 6 | Copy Pier Column Construction from model inputs and paste into OpenBrIM. | |
| 7 | Go to Foundation (Complete) under Substructure on the tree view. | |
| 8 | Copy Foundation Construction from model inputs and paste into OpenBrIM. | |
| 9 | Go to Pile under Substructure on the tree view. | |
| 610 | Copy General Pile Construction from model inputs and paste into OpenBrIM. |
...
| Anchor | ||||
|---|---|---|---|---|
|
...