This part is to inform about the general purposes of section definitions.
Please follow the instructions provided below to set section definitions to be used in this bridge example.
| 1 | Navigate to Properties > Sections |  |
| 2 | To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section". | |
| 3 | Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle |   |
| 4 | Enter Width as 54 and Depth as 69 in import section editor. | |
| 5 | Click Import | |
| 6 | Rename this section as HammerHeadSec | |
| 7 | Assign Material as Fc_4ksi (If the material type came as default, there is no need to assign) | |
| 8 | Repeat the same steps from 2 to 7 for the second rectangular section Enter Witdh and Depth
Rename this section as HalfHammerHeadSec1 Assign Material as Fc_4ksi |  |
| 9 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as HalfHammerHeadSec2 Assign Material as: Fc_4ksi |  |
| 10 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as ColSec_P2 Assign Material as: Fc_5ksi |  |
| 11 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as ColSec_P3 Assign Material as: Fc_5ksi |  |
| 12 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as PileSec Assign Material as: Fc_5ksi |  |
| 13 | Import another section by selecting
Assign Material as: A709_50W |  |
| 14 | Import another section by selecting OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8 Assign Material as: A709_50W |  |
| 15 | Create a new section by defining its name as RigidSection |  |
| 16 | Copy and paste the data below. RigidSection RigidMaterial 6400.0000 6400.0000 6400.0000 3413333.3333 3413333.3333 3413333.3333 0.0000 YES NO NO |
Completed Sections definitions are illustrated below.
Add Comment