Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 10 Next »

Follow the below steps to define the reference support lines where the piers will be located.

1

Go to Support Line on tree view next to the data spreadsheet.

2

Select Bridge and enter the support stations.

 Quick Tip: Transverse Offset Direction

Offset values use PGL as the reference point.

Follow the below steps to copy and paste all inputs from our data set.

1

Go to Support Lines under Bridge Geometry.

2

Copy Bridge Parameters from model inputs and paste into OpenBrIM.

Completed Support Lines is illustrated below.

 Quick Tip: Copy inputs to OpenBrIM

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.

While pasting large data, it would be handy to turn of Auto-refresh .

Support Lines

Bridge Parameters

Abut1	BRG1	0	0	0
Pier2	BRG1	160	0	0
Pier3	BRG1	370	0	0
Abut4	BRG1	530	0	0

  • No labels