Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 17 Next »

After clicking on 'Bridge Geometry> Bridge Alignment' in the navigation treeview, follow the steps to define the Bridge Alignment You can use the collapsed documentation page below for more information on the explanations of each parameter.

 Bridge Alignment
Bridge Alignment [SIG]
1

(blue star) Click the three-dots icon on the Alignment cell, and then set ALIGNMENT1.

2

(blue star) Keep the bridge alignment name as default.

3

You can enter additional bridge info through the Bridge Info tab if needed.
(blue star) For this example, the parameters should be kept as defaults.

The completed bridge alignment is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

To view the entire procedure explained on this page, please watch the recorded Video below.

20231002171117.mp4

  • No labels