TASK 2 DUE DATE 20/06/22

Owned by Zeynep Bayam
Jun 16, 2022
1 min read

  • You should edit the objects you made for the Task 1 according to followings;

    • Bridge span should be along the x-x axis. In other words, girders expansion should be
      in x-direction.

    • Bearings should be located on Bearing Axis (One of the inputs should be selection of
      Bearing Axis)

    • Girder should be located between two bearings (One of the inputs should be selection
      of 2 Bearings as a list)

    • Deck should be located on I girders.

  • Use of the functions in 3rd and 4th lecture such map, filter, sort, reverse is highly recommended.

  • An alignment should be integrated to the project. All objects should behave according to
    alignment you assigned. The horizontal alignment should be straight and the transverse
    alignment data should be according the following image.

  • The objects should have required alignment parameters and functions.

  • If you need further assistance, feel free to ask questions.