In this part, the definitions for some terms referred through this document are provided.
Analytical line:
An analytical line is the representative of the FE model for i) beams and ii) walls.
From a mathematical point of view, two points and one line forms an analytical line. In case of a discontinuity on a straight line between the two points, breakpoint(s) should be pointed at the stations of the discontinuity.
Figure 1a represents the formwork plan of a group of shear walls and beams. Overlaying the architectural/structural drawing in the AEC|BOLT AUTOCAD App, this drawing is generated.
The drawing in Figure 1a is transformed into:
-3D model
-Geometry for the construction documents
Figure 1a
Figure 1b illustrates the analytical wall definitions for the same layout.
Figure 1b
Figure 1c
Add Comment