Mats

Mat foundation is defined and drawn from this section.

Figure 1

→ Click Mat Edge button as shown in Figure 1 to draw mat foundation as illustrated in Figure 2.

Figure 2

→ Enter the properties of the mat edge such as offset, thickness, soil capacity or soil subgrade modulus.

→ Select the concrete and rebar material.

Figure 3

To divide mat edge into pieces which have different properties;

→ Click Mat Piece button as shown in Figure 1 and draw piece area as demonstrated in Figure 4

Figure 4

→ Enter the properties of the mat piece such as offset, thickness, soil capacity or soil subgrade modulus.

→ Select the concrete and rebar material.

Figure 5