Figure 1
Pile cap can be assigned as pile cap template or as custom pile cap. Before the assignment, pile cap template must be imported or custom pile cap must be created. Importing template or creating custom pile cap is described in Templates and Custom sections under this main section.
Click “Assign Pile Cap Template” button as shown in Figure 1 and select column/columns then press “enter” to assign previously imported pile cap template.
Click “ Assign Custom Pile Cap” button as shown in Figure 1 and select column/columns then press “enter” to assign previously created custom pile cap.
Figure 2
Pile template and other parameters can be edited later as demonstrated in Figure 2.
Add Comment