Pile Load [SIG]

Inputs

Pile Cap : Choose the pile cap to impose the nodal load on the top node of all piles.

Individual Piles : Select individual piles to apply the nodal load on their top node.

Stage : Select a stage to apply the load.

Fx : Force in X direction. The longitudinal direction along the alignment will correspond to the X direction.

Fy : Force in Y direction. The transverse direction along the alignment will correspond to the X direction.

Fz (Gravity) : A positive value indicates that the load is applied in the direction of gravity, while a negative value indicates that the load is applied in the opposite direction.

Mx : Moment in the longitudinal direction along the PGL.

My : Moment in the direction perpendicular to the PGL.

Mz : Moment in the vertical direction.