Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 7 Next »

If the user wishes to apply static wind on live load, they can utilize this option.

The line load shall be applied onto the central line of the lane position designated by the user.

In the "Wind on Live Load AASHTO" section, users can choose defined lane positions. The line load will then be applied to these positions separately. For each designated lane location, a unique result scenario will be generated. The critical envelopes of these result scenarios will be used in subsequent design procedures.

Geometry

Here, the user can specify the center line of the lane, which can then be utilized in the Wind on Live Load AASHTO or Wind on Live Load Custom sections.

Bridge: Select the bridge

Start - End Station: Specify the start and end stations along the PGL.

Transverse Offset: Use this parameter define the centerline of the lane, consider 0 as the PGL location.

  • No labels