Barrier [SIG]

Barrier

Section: To create a custom section for the barrier, the section editor can be used. The weight of the barrier will be computed based on the area of the assigned section. When applying wind loads, the depth of the barrier is important.
Users can utilize the concrete material without changing the stiffness value and construct the barrier under the superstructure attachment construction with options "stiffness=no" and "weight factor=1".

Orientation: The orientation of the barrier should be set as "left" for the barriers placed on the left end of the deck and "right" for those placed on the right end to rotate the barrier section accordingly.

Deck: Upon selecting the connected deck, the barrier will be placed on top of it and the vertical elevation will be adjusted accordingly.

Start Transverse Location [in] - End Transverse Location [in]: The transverse station is defined relative to the PGL, where the PGL location is 0. When the user clicks on the three dots cell, the "Set to Left or Right" options appear, which enable the barrier to be positioned quickly at the exterior end of the deck.

Deck: Upon selecting the connected deck, the barrier will be placed on top of it and the vertical elevation will be adjusted accordingly.

Start - End Station Option[Deck Start/Input]: If you want to automatically assign start and end stations to the deck start and end, select 'Deck Start' for both. If your barrier starts and ends at different locations along the PGL, choose 'Input'

Start - End Station: Station along the PGL.

Start Transverse Location - End Transverse Location : The transverse station is defined relative to the PGL, where the PGL location is 0. When the user clicks on the three dots cell, the "Set to Left or Right" options appear, which enable the barrier to be positioned quickly at the exterior end of the deck.